 |
Although Fluoroplastics present no hazard under normal processing conditions these safe-handling points should be followed:
- WARNING: VAPORS HARMFUL IF INHALED.
- The work area should be adequately ventilated at all times because HF, COF2 may begin to be produced at above the following temperatures (PTFE. PFA=260, PFA=230, ETFE=180, PCTFE=150) and the volume may increases at temperatures above these (PTFE. PFA=400, FEP=300, ETFE=260, PCTFE=200). IF fluoroplastic is incinerated, the acidic gases must be removed by alkaline scrubbing techniques.
- Personnel should be cautioned against inhaling the fumes liberated during processing and provided with suitable protective equipment.
- Do not smoke in the work areas as harmful vapors and gases can be produced if fluoropolymers become transferred onto tobacco.
- Avoid breathing dust and contact with eyes.
- Wash hands and face after handling.
- Waste generated during processing should be treated by waste treatment specialists and disposed of in accordance with federal, state and local waste disposal regulations.
- Read the "Material Safety Data Sheet" before beginning processing operations.
|
|
