Automated Operation Management

Home
Products
- Products Top
- Residential
  - Split type air conditioners
  - Wall-mounted type
    Inverter Ururu Sarara
  - Wall-mounted type
    Inverter FTXG series
  - Wall-mounted type
    Inverter FTK(X)S/FTK(X)D series
  - Wall-mounted type
    Non-inverter FT/FTY series
  - Floor / Ceiling Suspended Dual type
  - Multi-split type series
  - Inverter
    SUPER MULTI NX
  - Inverter
    SUPER MULTI PLUS
  - Non-Inverter Multi
  - Air Purifiers
  - MC707
- Commercial
  - SkyAir
  - Super Inverter
  - Non-Inverter
  - Packaged air conditioners
  - Duct-connected series air conditioners
  - Packaged air conditioners
- VRV system
- Network Solution
- Applied system
  - Water Chillers
  - Fan Coil Units
Global Sales Network
What's New
Contact Us
Site Map

Air Conditioners Home > Products > Network Solution > Intelligent Manager III > Features > Automated Operation Management

Intelligent Manager III

Automated control functions free the operator from the details of daily operation management.

Schedule

Daily operation start/stop time settings
Holiday settings
Automatic switching to heating (fan) mode
Automatic switching of temperature settings

(e.g.)Pre-cooling and pre-heating control provides comfortable temperature at the start of the day.

This function switches the air conditioning system on beforehand so that the temperature is just right when users arrive.

Analogue interlock

During cooling operation, this function shuts down the air conditioning equipment and brings in cool air from outside when the system determines that the outdoor temperature is lower than the temperature setting. Using outside air for cooling reduces energy consumption.

Econo mode (Option)

Reduces power consumption , while maintaining room comfort.

Based on a predetermined schedule, the Intelligent Manager III executes capacity control and intermittent operation of A/Cs so as not to increase the discomfort index.

Power limit control

This function estimates the power consumption and operates at the maximum level within a limited range if the set point is likely to be exceeded. This reduces power consumption while maintaining comfort as far as possible.

Automatic change over

The Intelligen Manager III measures room temperature and can automatically change over between cooling and heating modes. This provides comfort by enabling selection of the appropriate mode and takes the human factor out of changeovers.

Temperature limit

Intelligent Manager III allows users to put limitations on the maximum and minimum temperatures and provides an appropriate room temperature via automatic control. Furthermore eliminates any unnecessary and excessive operation that may result in overcooling or overheating.

Remote controller restriction

Remote control operation can be disabled for specific air conditioner units. This can prevent trouble arising from pranks or setting errors in locations such as school classrooms or entrance lobbies and other public areas.

Sliding temperature

Intelligent Manager III can monitor the outdoor temperature and automatically adjust room temperature to minimise drastic temperature differences with the outdoors.
Along with energy efficiency, Intelligent Manager III also can eliminate any uncomfortable cold shock around building entrances and the like.

Simple Operation and Management
Data Management
Total Building Management
Automated Operation Management
Web Access Function